The United States government is a massive employer, and is always looking for qualified candidates to fill a wide variety of open employment positions in locations across the country. Below you’ll find a Qualification Summary for an active, open job listing from the Department of the Army. The opening is for a Civil Engineer (Open Continuous / DHA) in Fort Sill, Oklahoma Feel free to browse this and any other job listings and reach out to us with any questions!
Civil Engineer (Open Continuous / DHA) – Fort Sill, Oklahoma
Army Installation Management Command, Department of the Army
Job ID: 170056Start Date: 11/22/2019End Date: 12/02/2019
Who May Apply: US Citizens ****This Open Continuous announcement allows acceptance of applications through the closing date. The intent of this announcement is to establish a standing register of qualified candidates and refer for consideration when vacancies occur. The first Cut-Off date for receipt/referral of applications to be considered for available vacant positions will be December 2, 2019; subsequent Cut-Off dates will be January 2, 2020; February 3, 2020; March 3, 2020; April 2, 2020, May 4, 2020 and June 4, 2020. ***** NOTE: *****ONCE THE SELECTION IS MADE, THIS ANNOUNCEMENT WILL BE CLOSED WITHOUT FURTHER NOTICE.***** In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Civil Engineer: A. Degree: Bachelor’s degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (NOTE: You MUST attach a copy of your transcripts.)
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure – Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board’s eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test – Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses – Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum – Successful completion of a curriculum leading to a bachelor’s degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience at GS-11 Level: One year of specialized experience which includes: 1) Provide support in the design of civil type construction projects (roads, utilities, drainage, and structural). 2) Prepare site plans for drainage, roads and utilities. AND 3) Experience developing cost estimates of a construction project. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering. (NOTE: You MUST attach a copy of your transcripts.)
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. (NOTE: You MUST attach a copy of your transcripts.) Specialized Experience at GS-12 level: One year of specialized experience which includes: 1) Develop estimates of construction costs for civil and structural projects. 2) Prepare structural design for buildings using automated system such as CADD Software. 3) Review contractor’s plans for compliance. And 4) Prepare the design of construction roads, parking areas, drainage and water utility systems. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service GS-11. Some federal jobs allow you to substitute your education for the required experience in order to qualify. For the GS-12 level, you must meet the qualification requirement using experience alone–no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas:
Building and ConstructionCivil EngineeringProject Management
If you’d like to submit a resume or apply for this position, please contact Premier Veterans at email@example.com. All are free to apply!